The Little Switch is rated at 100 Amps of continuous service and 500 amps for 10 second surges making it ideal for street rods, classics, and passenger cars. In addition to preventing battery drain, this unique switch is also a cost effective anti-theft device. A rubber boot seals the neck from moisture and dirt. Competition approved by IMSA, ARCA, and SCCA.

Part No.FR1002-1
Max Continuous Current100 Amps
Max Surge Current500 Amps (10 seconds)
Environmental Protection RatingIP4X
Water ResistantNo
Operating Temperature Range-40°C to +50°C / -40°F to +122°F
Contact TerminalsCopper
Contact HardwareZinc-Plated Steel
Additional NotesApproved for IMSA, ARCA, and SCCA competition use
Available Stud Length0.50"
Extension Handle/LeverNo
LED On/Off IndicatorNo
Lock-Out CapabilityYes - Removable Key
Max Tightening Torque4.43 ft. lbs. / 6NM
Mounting Bracket IncludedNo
Mounting Bracket Part No.FR1004
Replacement Key Part No.FR1002K
Stud DiameterM8
Terminal Covers IncludedYes - Protective Boot
Terminal Covers Part No.FR1002BT
Voltage6V/12V/24V

View Additional Specs

The Little Switch (No Mounting Bracket)

$38.31

Login or sign up to buy
SHARE: Facebook Twitter


Installation Instructions > Data Sheet >
  • Product Disclaimer >

    WARRANTY DISCLAIMER:
    Flaming River warrants its products to be free from defects in material and workmanship for a period of one (1) year after the date of purchase. The Big Switch FR1044, FR1046 and FR1047 are warranted for a period of three (3) years from the date of purchase. Provided that it is not mounted with a steel bracket and provided further that it is adequately protected from environmental conditions. All electrical products other than the Big Switch are warranted for a period of ninety (90) days from the date of purchase. Flaming River’s warranty liability is limited to the replacement of defective products. Flaming River is not liable for any labor costs associated with any warranty claim, or for any incidental or consequential damages. Improper installation, abuse, racing, and/or modification of the products void this warranty. No warranty or merchantability or fitness for a particular purpose is made by Flaming River with respect to any of its products.

    DISCLAIMER: It is the customer’s responsibility to determine the suitability of a given Flaming River product for the customer’s uses. Likewise, it is the customer’s responsibility to install a Flaming River product. Contact the vehicle manufacturer whenever installing a switch to confirm the appropriateness of using such a switch and the recommended placement of the switch on the vehicle. Be aware that the installation of certain Flaming River products may adversely impact a manufacturer’s warranty with respect to certain vehicles and other manufactured goods. Flaming River will repair or replace any product found to be defective in material or workmanship. Improper installation, abuse, racing and/or modification VOID WARRANTY. Flaming River is not responsible for any labor costs associated with any warranty.

    Note: Terminals on battery disconnect switches are live parts of the electrical system and should be treated just like battery terminals Covers are recommended, but not included, for each kit. Contact your vehicle’s manufacturer to determine proper placement and suitability.

  • Request A Quote >


International Customers, please order by phone: 440-826-4488


P65 Warning CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Working...Please Wait
working